It is made out of an
And since we are talking about Rae's spring top, there is another spring top sewalong going on right now! Check it out!
Monday, March 19, 2012
Week 19 - Spring Ruffle Top
Here is my take on Rae's Spring Ruffle Top (without ruffles though...) I made it just before the winter came and wore it once... which is why I haven't shared it until now. After the wash it was shamefully burried in a drawer with nice warm sweaters. So now that spring is here and I am pregnant I thought it's time to share this top that's so perfect for maternity wear!
It is made out of anold vintage sheet (fancy fancy... I thought I do a test version first) but you know how these things are... it's not perfect but I love it, so I wear it. I love the green tone of the sheet and I have used some of it in different projects (here or here.)
And since we are talking about Rae's spring top, there is another spring top sewalong going on right now! Check it out!
It is made out of an
And since we are talking about Rae's spring top, there is another spring top sewalong going on right now! Check it out!
Friday, March 16, 2012
No Sew Kids Craft Apron
This is technically not really an apron more a general cover-up, but it's a 5 minute T-shirt recycling project that will keep your toddler's clothes clean from glitter, glue and paint! It could be the perfect (and way cheapest!) solution for a playgroup, Preschool, Sunday school or any other toddler (group) doing crafts. I know there are really cute crafts apron pattern out there and also tons of cute fabric, but really how much time and money does one invest in something that will only get dirty and spilled on, especially if you have to make 20 or more?
All you need per apron:
-one old men's T-shirt in size M or L (XL might so huge that you'll actually have to sew it smaller)
-two 15 cm/6" pieces of 1/4" elastic
You'll also need a pair of scissors, 2 safety pins and a few minutes of your time.
First get your toddler and hold the T-shirt up on him/her to check if the size is good. The T-shirt's width from sleeve to sleeve is about the same as your toddler's wrist to wrist measurement. Most likely a M or L will fit any toddler, XL will probably be to big and you'd have to sew the sleeve a bit shorter but I won't go into that here.
Turn the T-shirt inside out. Find where the seam meets the hem on the sleeve. We'll use the folded hem as casing for the elastic. To do this you have to cut 2 small holes through the inner layer of fabric (the folded bit on the hem), one hole on each side of the seams, but make sure not to cut the seams open. (see pictures below for clarity).
Pin one end of the elastic to the sleeve using a safety pin. Attach the second safety pin to the other end of the elastic and insert into the casing, all the way through. The sleeve will start gathering up a lot, that's why we pinned the one end down so it won't slip through.
Now you should have both ends of the elastic next to each other peaking out of the holes like this:
Tie the two ends of the elastic together with a double or triple knot (or sew the two ends together, but hey, this is a no sew project!); and remove the safety pins. That's how the finished sleeve looks like:
Repeat on second sleeve. Turn the shirt right side out and put on your toddler to see if it fits. The sleeves should be snug around the wrist protecting any other shirt underneath from getting all dirty. The shirt will be pretty long on the toddler, protecting his/her pants, knee-length is the best, protecting most of the clothes but not getting in the way of the little feet. Most likely you can just leave the shirt as is, but if it's way to long cut off a bit from the bottom. And you're done!
Now put the shirt on your toddler and start the crafty fun...
-one old men's T-shirt in size M or L (XL might so huge that you'll actually have to sew it smaller)
-two 15 cm/6" pieces of 1/4" elastic
You'll also need a pair of scissors, 2 safety pins and a few minutes of your time.
First get your toddler and hold the T-shirt up on him/her to check if the size is good. The T-shirt's width from sleeve to sleeve is about the same as your toddler's wrist to wrist measurement. Most likely a M or L will fit any toddler, XL will probably be to big and you'd have to sew the sleeve a bit shorter but I won't go into that here.
Turn the T-shirt inside out. Find where the seam meets the hem on the sleeve. We'll use the folded hem as casing for the elastic. To do this you have to cut 2 small holes through the inner layer of fabric (the folded bit on the hem), one hole on each side of the seams, but make sure not to cut the seams open. (see pictures below for clarity).
Pin one end of the elastic to the sleeve using a safety pin. Attach the second safety pin to the other end of the elastic and insert into the casing, all the way through. The sleeve will start gathering up a lot, that's why we pinned the one end down so it won't slip through.
Now you should have both ends of the elastic next to each other peaking out of the holes like this:
Tie the two ends of the elastic together with a double or triple knot (or sew the two ends together, but hey, this is a no sew project!); and remove the safety pins. That's how the finished sleeve looks like:
Repeat on second sleeve. Turn the shirt right side out and put on your toddler to see if it fits. The sleeves should be snug around the wrist protecting any other shirt underneath from getting all dirty. The shirt will be pretty long on the toddler, protecting his/her pants, knee-length is the best, protecting most of the clothes but not getting in the way of the little feet. Most likely you can just leave the shirt as is, but if it's way to long cut off a bit from the bottom. And you're done!
Subscribe to:
Posts (Atom)
